Comments for durdle.com

Comment on Jaffa! Kree! by Mick

Mick — Fri, 12 Aug 2011 15:16:27 +0000

Brilliant.

Comment on How to enable remote access to MSDE by Using BET to move BESX 4.1.4 to BESX 5.0.3 - BlackBerry Forums Support Community

Using BET to move BESX 4.1.4 to BESX 5.0.3 - BlackBerry Forums Support Community — Fri, 03 Jun 2011 13:34:22 +0000

[...] [...]

Comment on Exchange 2010 SP1 breaks pre-SP1 Transport Agents by Derek

Derek — Tue, 19 Apr 2011 06:53:12 +0000

Thanks for the IISReset tip!

Note: I had exited/restarted powershell, but found I still needed to perform the iisreset.

Comment on NAT Loopback broken on Draytek Vigor 2820 firmware > 3.3.3 by RvdH

RvdH — Mon, 18 Apr 2011 11:57:58 +0000

Draytek Vigor 2820 3.3.5.2 RC6 firmware + release notes can be found here:
ftp://ftp.draytek.pl/Seria_2820/Firmware/3.3.5.2_BETA/

Comment on The Almost Complete Life on Mars Soundtrack (Series 1) by Grover Norquist

Grover Norquist — Sat, 16 Apr 2011 03:54:24 +0000

There is a song that sounds like Led Zeppelin in the BBC second season. Episode with the Pakistani drug dealers where ST meets his ex girlfriend’s mother. The song the fall asleep to: sympathize…realize… something like that. What is that song?? Driving me bonkers. Any help?

Comment on NAT Loopback broken on Draytek Vigor 2820 firmware > 3.3.3 by John

John — Fri, 15 Apr 2011 12:26:14 +0000

Seg have put a beta firmware download on their website for the nat loopback problem. I have installed and tested it, and it seems to work on all wan aliases! :-)

Comment on NAT Loopback broken on Draytek Vigor 2820 firmware > 3.3.3 by John

John — Thu, 07 Apr 2011 14:54:04 +0000

Just tried the v2820 232201 RC3a, the loopback only works on the first IP address of the internet range, I have 8 internet IP addresses, and use the first 3, for various services, only the routers base addess would work :-( so still buggy.

Comment on NAT Loopback broken on Draytek Vigor 2820 firmware > 3.3.3 by Gdw

Gdw — Wed, 06 Apr 2011 20:56:07 +0000

Hi RvdH – Have just upgraded using this firmware. It has worked fine in that the NAT loopback issue is resolved, however my admin password seems to have changed. Have tried all the defaults I can find but no joy. All other settings seem to have been retained, ie I can VPN on etc… Any thoughts?

Comment on ZoneMinder Control Script for Foscam FI8918W by Haim

Haim — Sun, 03 Apr 2011 07:07:24 +0000

Control is working for me but I can’t seem to get the videostream to display.
This is what I have configured in the camera source:

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: 192.168.1.1
Remote Port: 80
Remote Host Path: /videostream.cgi?user=admin&pwd=password

What am I doing wrong?

Comment on NAT Loopback broken on Draytek Vigor 2820 firmware > 3.3.3 by Dan

Dan — Fri, 01 Apr 2011 07:43:10 +0000

Very much appreciated RvdH, I’ll give this a try this evening.